China OEM Pp Injection Moulding Factory - Plastic reels for cable and wire – Mestech

The cable reel is divided into two large and small ones.

Large-scale wire reel diameter more than 1 meter, some even more than 5 meters, the typical representative of large-scale wood transport, logistics wire tray. The diameter of small cable reel is only 30cm-100cm, which is typically represented by ABS flame retardant material and high temperature resistant material.

Some reels used in high temperature and high humidity environment can also be made of nylon and other materials.

Plastic reels for cable and wire

What are the characteristics of plastic wire reel ?

1. plastic varieties, easy to coloring, bright colors.

2. It has good corrosion resistance, acid and alkali resistance, oil resistance and impact resistance, and has better mechanical strength.

3. Easy-to-mold, the product is injection-molded with special engineering material for plastic line, with high precision and advanced structure.

Side plate is strengthened with compact ribs. It has good balance performance, high strength, acid and alkali corrosion resistance. The balance accuracy can reach 6.3 grade or more. The integral structure is a combination of plastic and metal to ensure the requirements of shaft

holes and electrical conductivity. The parts of the product can be replaced and maintained conveniently.

With the rapid development of wire and cable industry, the production speed is getting higher and higher, and the balance of all plastic coils is required. At present, in the production process of all kinds of plastic coil, only plastic coil is produced by injection mold, so that each product keeps uniform. It has unique advantages in the uniformity and balance performance of plastic coil, and has the advantages of light weight, acid resistance, corrosion resistance and smooth surface.

The plastic wire coil takes advantage of its own advantages to occupy the market, gradually expand the market, and gradually replace the old products. The plastic disc used in the production of electronic wires is formed once, so that the side plate and cylinder of the finished disc can be controlled within 0.1 mm, which meets the production needs of ultra-fine wires. Processing and Especially for long-distance pipelines, when the optical cable is laid in the silicon pipe, reasonable tray can reduce waste, otherwise, either the rich amount of optical cable is too large, or the length of optical cable is not enough, one end of the optical cable can not reach the manhole in the silicon pipe.

Wire reel was originally invented as the turnover of cable. With the development of science and technology, the use of wire reel is expanding, wire disc also produced a lot of different types. Common coils are high-speed coil, cable coil, portable coil, coil coil, high-speed machine coil with corrugated disk and wheel, and so on, the following small to do a detailed introduction of coil.

Introduction to commonly used thread knowledge

1. High-speed wire disc: PND high-speed machine wire disc is suitable for wire drawing equipment and other wire equipment with line speed below 50m/sec.

2. Cable tray: suitable for wire drawing machine and other wire equipment with line speed below 50m/sec, also can be used as wire tray for heat treatment.

3. portable duplicate line: the line plate introduces advanced technology, technology, special equipment and special steel PDR.

Development, design and manufacture of wire and cable industry, welding materials industry and other industrial PN, PND, PL and special functions of a variety of steel structure machine coils.

4. is double line: the line plate introduces advanced technology, technology, special equipment and special steel PDR. Development, design and manufacture of wire and cable industry, welding materials industry and other industrial PN, PND, PL and special functions of a variety of steel structure machine coils.

5. High-speed machine coil: PND high-speed machine coil suitable for wire drawing equipment and other wire equipment with line speed below 50m/sec.

6. corrugated plate: PL corrugated structure delivery tray is suitable for production, transportation and delivery of wire and cable products.

7. I-wheels:   the internal turntable of wire and cable manufacturing industry, is the bundle, stranding, extrusion and other non-drawing process of the ideal coil.

PN series process turntable wire tray is the key product of our company: the product is made of special engineering plastic injection molding for plastic cable tray. The product has high precision, advanced structure, strengthened side plate ribs, good balance performance, high strength, acid and alkali corrosion resistance, balance accuracy can reach 6.3 level or above. Integral structure is plastic, metal matching combination, to ensure the requirements of shaft hole and conductivity, product parts can be replaced, easy maintenance

Mestech Industrial Limited is Engaged in designing and manufacturing injection moulds for plastic reels for years. If you have any need in these products, please send you your inquiry to us.